Accurate Phase Calibration for Digital Beam-Forming in Multi-Transceiver HF Radar System

Hung Q. Nguyen, Jim S. Whittington, John C. Devlin, Ha L. Vu, Ngoc-Vinh Vu, Eddie Custovic

Abstract


The TIGER-3 radar is being developed as an “all digital” radar with 20 integrated digital transceivers, each connected to a separate antenna. Using phased array antenna techniques, radiated power is steered towards a desired direction based on the relative phases within the array elements. This paper proposes an accurate phase measurement method to calibrate the phases of the radio output signals using Field Programmable Gate Array (FPGA) technology. The method sequentially measures the phase offset between the RF signal generated by each transceiver and a reference signal operated at the same frequency. Accordingly, the transceiver adjusts its phase in order to align to the reference phase. This results in accurately aligned phases of the RF output signals and with the further addition of appropriate phase offsets, digital beamforming (DBF) can be performed steering the beam in a desired direction. The proposed method is implemented on a Virtex-5 VFX70T device. Experimental results show that the calibration accuracy is of 0.153 degrees with 14 MHz operating frequency.

Full Text:

PDF

References


R. A. Greenwald, K. B. Baker, R. A. Hutchinsa, and C. Hanuis, “An HF phased-array for studying small-scale structure in the high-latitude ionosphere,” in Radio Sci., vol. 20, no. 1, Jan.-Feb. 1985, pp. 63-79.

P. Dyson, J. Devlin, M. Parkinson, and J. Whittington, “The Tasman International Geospace Environment Radar (TIGER) - current development and future plans,” in Radar Conference, 2003. Proceedings of theInternational, Sept. 2003, pp. 282-287.

J. Whittington, J. C. Devlin, D. Elton, V. Vu, E. Custovic, K. Kamalakkannan, A. Console, B. Bienvenu, and H. Nguyen, “TIGER-3 overview,” Department of Electronic Engineering, La Trobe University, Australia, Tech. Rep., Jun. 2012.

H. Nguyen, E. Custovic, J. Whittington, J. Devlin, and A. Borgio, “Clock synchronisation in multi-transceiver HF radar system,” in SignalProcessing, Communications and Computing (ICSPCC), 2011 IEEEInternational Conference, Sept. 2011, pp. 1-6.

T. Roy, D. Meena, and L. Prakasam, “FPGA based digital beam forming for radars,” in Radar Conference, 2009 IEEE, May 2009, pp. 1-5.

B. Van Veen and K. Buckley, “Beamforming: a versatile approach to spatial filtering,” ASSP Magazine, IEEE, vol. 5, no. 2, pp. 4-24, Apr. 1988.

D. Theodoropoulos, G. Gaydadjiev, and G. Kuzmanov, “A reconfigurable beamformer for audio applications,” in Application Specific Processors,2009. SASP ’09. IEEE 7th Symposium on, July 2009, pp. 80-87.

C. A. Balanis, Antenna theory : analysis and design / Constantine A. Balanis, 2nd ed. John Wiley & Sons, New York, 1997.

T. W. Parks and C. S. Burrus, Digital filter design. New York, NY, USA: Wiley-Interscience, 1987.

A. Antoniou, Digital Filters: Analysis, Design, and Applications, 2nd ed. New Delhi: Tata Mcgraw Hill Com. Ltd, 1993.

S. Winder, Analog and Digital Filter Design, 2nd ed. Elsevier Science, 2002.

Xilinx, “IP logicore FIR compiler v5.0,” Tech. Rep., Mar. 2011. [Online]. Available: www.xilinx.com/support/documentation/ipdocumentation/fircompilerds534.pdf

Xilinx, “LogiCORE IP CORDIC v4.0,” Tech. Rep., Mar. 2011. [Online]. Available: www.xilinx.com/support/documentation/ipdocumentation/cordicds249.pdf


Refbacks

  • There are currently no refbacks.


International Journal of Electronics and Telecommunications
is a periodical of Electronics and Telecommunications Committee
of Polish Academy of Sciences

eISSN: 2300-1933